4GE+2POTS+CATV+WiFi ONU
You are here: Home / 4GE+2POTS+CATV+WiFi ONU

Introduction

V2800EW terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. They were developed by V-Solution independently. These boxes are based on the mature Gigabit EPON technology, which have high ratio of performance to price, and the technology of 802.11n WiFi (2T2R), Layer 2/3, CATV receiver/WDM(V2800W only) and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1 and above version) from China Telecom.

Dimension: 240mm*37mm*150mm(W*H*D)

v2800ew

Special Features

  • Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
  • Integrated OAM remote configuration and maintenance function.
  • Support rich QinQ VLAN functions and IGMP Snooping multicast features.
  • Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
  • Support 802.11n WiFi(2T2R) function.
  • Support NAT, Firewall function.
  •  Support IPv4 and IPv6 dual stack.
  • Integrated line testing compliant with GR-909 on POTS.

Technical parameters

Technical itemsDescription
PON interface1 EPON interface, SC single-mode/single-fiber, symmetric 1.25Gbps
WavelengthEPON Tx 1310nm, EPON Rx 1490nm, CATV 1550nm
Optical interfaceSC/APC connector
RX sensitivity< -25dBm @ 1490nm
CATV interfaceSCTE F type(V2800W only)
WLANCompliant with IEEE802.11b/g/n, 300Mbps,
2T2R One internal antenna and one external antenna
LAN interface4x 10/100/1000Mbps  auto adaptive Ethernet interfaces, Full Duplex / Half Duplex, AUTO-MDIX, RJ45 connectors
Downstream POTS interface2 FXS, RJ11 connectors
Indicators11 indicators, for status of power supply, PON, LAN , POTS and CATV .
DC power supply+12V, external AC-DC power adaptor
Power consumption≤12W
Operating conditionOperating temp: -5~+55℃
Operating humidity:10~90%(non-condensed)
Storing conditionStoring temp: -30~+60℃
Storing humidity:10~90%(non-condensed)
Dimension240mm*37mm*150mm(W*H*D)
Net weight0.62Kg

Data Service Functions

  • Full speed non-blocking switching.
  • 2K MAC address table.
  • 64 full range VLAN ID.
  • Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
  • Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
  • Support auto polarity detection of Ethernet ports (AUTO MDIX).
  •  Integrated IEEE802.1p QoS with four level priority queues.
  • Support IPv4 IGMP snooping and IPv6 MLD snooping.
  • Support bridge, router and bridge/router mixed mode.

POTS Service Functions

  • Call protocol: SIP(IMS compatible)/H.248(Megaco)/MGCP optional, seamless compatible with all popular call agent.
  • Integrate heartbeat function and support active/standby call agent.
  • Voice coding: ITU-T G.711/G.723.1(5.3K/6.3Kbit/s)/G.729, auto-negotiate with call agent.
  • Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length.
  • Support high/low speed fax, bypass fax, and T38 fax.
  • Support high speed MODEM(56Kbps) dial access.
  • Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, call forward, call waiting, hot-line call, alarm clock, and all kinds of value-added voice service.
  • Multi-party conferencing.
  • Line testing according to GR-909.
  • IP address assignment: dynamic PPPoE/DHCP Client and static IP.
  • Support WEB, CLI,IVR,TR069.
  • Integrated OAM, XML, DHCP option 66 & 67 for auto configuration and firmware upgrade.
  • Call loss less than 0.01%.

WIFI Service Functions

  • Integrated 802.11b/g/n, 300Mbps, 2T2R.
  • Support 128 connections.
  • Support WEP and WPA/WPA2 security protocols.

CATV Service Functions

  • RF frequency: 45~875MHz.
  • Turn on/off RF output remotely.
  • RF level can be showed on PC Web real time.

Application Chart

v2800ew-app-chart

We are hiring!

hiring

×